Contact us at
(800) 945-5542 in U.S.
(877) 611-5122 in Canada
A single conductor cable with Annealed bare copper, class B per ASTM B-3 or aluminum conductor, triple extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPR insulation, thermosetting semiconducting insulation shield, helically applied, 5 mil CU tape shield w/25% overlap, and black PVC jacket, all extruded in the same operation.
MV-105 power cable is for use in main feeder, distribution and branch circuits in industrial, commercial and electric utility installations. MV-105 cables may be used in wet or dry locations in circuits not exceeding 15000 volts 133% insulation level at conductor temperatures not exceeding 105°C for normal, 130°C for emergency overload and 250°C for short-circuit conditions.
MV-105 = Medium Voltage / Maximum Temperature Rating 105°C *
EPR = Ethylene Polypropylene Rubber
PVC = Polyvinyl Chloride
KV = Kilovolt
* EPR-insulated cables are capable of operating at 105°C. However, the maximum operating temperature of the cable should be based on the maximum operating temperature of the cable accessories to be used.
* Isolated in Air (NEC Table 310-69): Single conductor cable, 105°C conductor temperature, 40°C ambient temperature, and shields grounded at one point
* In Duct (NEC Table 310-77): Three single cables in plastic duct, direct-buried, 105°C conductor temperature, 20°C ambient temperature, earth RHO of 90°C-cm/Watt, 100% load factor, and shields short-circuited
* For 105°C continuous, 140°C emergency, 250°C short-circuit operation
Specifications / Conform To:
AEIC CS8
ICEA S-93-63
ICEA S-97-682
UL 1072; Type MV-105 Sunlight Resistant; For CT USE (1/0 AWG and Larger)
IEEE 383 Flame Test (1/0 AWG and Larger)
IEEE 1202 Flame Test (250 MCM and Larger)
Contact us at
(800) 945-5542 in U.S.
(877) 611-5122 in Canada
